GE 98572 GE Color-Changing Optical Mouse - Manual (Page 2)

Package Contents
• Color-Changing Optical Mouse
• Instruction Manual
System Requirements
• Windows
® XP, Vista, Windows 7
• Mac 10.1 or higher
• Available USB Port
Connecting your mouse
Connect your new mouse to the USB port on your computer. Move the mouse
to ensure there is a good connection.
If your mouse does not work properly, check that all connections are secure
and the cable is free of twists. If after following these steps your mouse still does
not work, please contact Jasco product support at www.jascoproducts.com
or call 1-800-654-8483.
Changing the color clips
1. Locate the groove at the rear of the mouse where
the color clip meets the base. Stick your thumbnail
in the groove and pry the color clip up and
off of the mouse.
2. Take the new color clip of
your choice and position the
front of it over the mouse,
matching the plastic posts
on the underside of the clip
to the holes on either side of
the scroll wheel.
3. Press the color clip down gently until you
hear the magnetic pins click into place.
It is securely on the mouse now. Enjoy
your new mouse color!
Thumbnail groove
Magnetic
pins Metal
plates
Posts Post holes