GE 84918 GE Universal Remote User Manual

Page 5

Code Search

If your device does not respond after you have tried
all the codes for your brand, or if your brand is not
listed, try searching for your code by following these
steps.

1. Manually turn on the device (TV, VCR, etc.) to

be controlled.

2. Press and hold the CODE SEARCH

button until the red indicator stays on,
then release the CODE SEARCH button.

3. Press and quickly release the desired

mode button (TV, VCR, etc.). The red
indicator blinks off once.

4. Press the

ON•OFF

button

repeatedly (up to 300 times) until
the device to be controlled turns
off. The red indicator blinks off
with each button press.

Most users will store VCR codes under the VCR
button, Cable codes under CABLE, etc. If (for
example) you want to store a VCR code under
CABLE, first follow the procedure for Direct Code
Entry (page 8) and press CABLE in step 2 of Direct
Code Entry, then enter ANY VCR code in step 3 of
Direct Code Entry. Then follow the steps above for
Code Search.

Note: If the device does not have a CHANNEL UP
button, use PLAY (VCR only) or POWER instead.
Code Search starts from the currently stored three
digit number under that mode. Sometimes the first
code that “works” with your device may only allow
limited functionality (e.g. the MENU button might
not work). There may be a code that performs more
functions. Continue the code search process until
the best code is found.

5. Press and release ENTER to install

the code.

Direct Code Entry

Write your codes down here for easy reference
later.

1. Press and hold the CODE SEARCH

button until the red indicator stays on,
then release the CODE SEARCH button.

2. Press and release the desired mode

button (TV, VCR, etc.). The red indicator
blinks, then stays lit.

3. Enter the 3 digit code

from the code tables
(on separate sheet).
Note: after a valid code
entry, the red indicator
turns off. For an invalid
code, the red indicator
flashes.

4. With your device on, press

ON•OFF

If the device turns off, no further
programming is required. Note: If
some buttons do not operate your
equipment, try one of the other codes
for your brand.

Device

Device stored Code

DVD
VCR
CBL/SAT
AUDIO
AUX