GE ZIC30GNDII - Manual (Page 2)

monogram.com
77
B
u
ilt
-i
n
a
ll
-r
e
fr
ig
e
ra
to
rs
an
d
al
l-
fre
e
ze
rs
B
u
il
t-
in
si
d
e
-b
y-
si
d
e
re
fr
ig
e
ra
to
rs
B
uil
t-
in
b
ot
to
m
-f
re
e
ze
r
re
fr
ig
e
ra
to
rs
Fre
e
-s
tan
d
in
g
re
fr
ig
era
to
rs
Fu
lly i
n
te
g
ra
te
d
re
fr
ig
era
to
rs
/
w
ine
r
ese
rv
e
The installation space
ZIC30GNZ11, ZIK30GND11, ZIK30GNZ11,
ZIK30GND11, ZIW30GNZ11, ZIW30GND11
The finish cutout width must be 30".
The cutout depth must be 25" for flush installations.
The front face of the refrigerator fits flush with 25" depth
adjacent cabinets.
Electrical
A 115V, 60Hz., 15 or 20 amp power supply is required. An
individual properly grounded branch circuit or circuit breaker is
recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall. Electrical must be
located on rear wall as shown.
Note: GFI (ground fault interrupter) is not recommended.
Water line
• A cold water supply is required for automatic icemaker
operation. The water pressure must be between 40 and
120 p.s.i.
• Route 1/4" O.D. copper or GE SmartConnect™ plastic tubing
between the house cold water line and the water
connection location.
• Tubing should be long enough to extend to the front of the
refrigerator. Allow enough tubing to accommodate a bend
leading into the water line connection.
• Water line can enter an opening through the floor or
back wall.
• Install a shut-off valve between the icemaker water valve
and cold water supply in the home.
Advance planning for fully integrated 30" customizable refrigerators and wine reserve
Height options
80” or * 84“
25” min. depth
30” Finished Width
Height adjustable
from 79-3/8” to 80-3/8” *
3/4”
23-3/4”
29-3/4”
1/8”
1-1/4”
4”
4”
3-1/8”
30”
Finished Width
25”
Cutout Depth
29-3/4”
Case Width
* 80” High installation.
The refrigerator can
be adjusted to fit
into a cutout that
is 79-1/2” min. to
80-1/2” max. height.
Use leveling legs
and wheels for a
maximum 1” height
adjustment.
* 84” High installation.
The refrigerator can
be adjusted to fit
into a cutout that
is 83-1/2” min. to
84-1/2“ max with
the appropriate door kit.
Use leveling legs
and wheels for a
maximum 1” height
adjustment.
80-1/2” Max.*
79-1/2” Min.
Finished
Opening
4”
4”
80”*
24-3/4”
30”
Finished Width
25”
Cutout Depth
29-3/4”
Case Width
84-1/2” Max.*
83-1/2” Min.
Finished
Opening
4”
4”
84”*
24-3/4”
30”
Finished Width
25”
Cutout Depth
29-3/4”
Case Width
* 80” High installation.
The refrigerator can
be adjusted to fit
into a cutout that
is 79-1/2” min. to
80-1/2” max. height.
Use leveling legs
and wheels for a
maximum 1” height
adjustment.
* 84” High installation.
The refrigerator can
be adjusted to fit
into a cutout that
is 83-1/2” min. to
84-1/2“ max with
the appropriate door kit.
Use leveling legs
and wheels for a
maximum 1” height
adjustment.
80-1/2” Max.*
79-1/2” Min.
Finished
Opening
4”
4”
80”*
24-3/4”
30”
Finished Width
25”
Cutout Depth
29-3/4”
Case Width
84-1/2” Max.*
83-1/2” Min.
Finished
Opening
4”
4”
84”*
24-3/4”
Product dimensions