GE ZIRS360NXLH - Manual (Page 3)

100
Advance planning for built-in all-refrigerators and all-freezers
multiple product installations
When installing an all-refrigerator and all-freezer side
by side, the installation space must be 71-1/2" wide.
• Locate water and electrical as shown.
• A separate 115V, 60Hz., 15- or 20-amp power supply
is recommended for each product.
Additional cutout width may be required when side
panels are used.
In a side-by-side installation of a left- and right-hand door
swing product, no clearance between the units is required.
Order ZUGSS2 European, ZUGPP2 Professional or ZUG2
custom panel unified grille panel kit for one continuous
grille panel.
Clearances for two products installed
side by side with the same (left or right)
door swing.
Allow 2" minimum clearance between the products to prevent
door swing interference. Allow 15" minimum to a wall to achieve
full drawer extension and pan removal. Additional clearances are
required when using custom handles and panels. NOTE: ZUG2,
ZUGSS2 or ZUGPP2 grille panel kits will not fit this installation.
695Dia3
25"
Min. to
Wall
0"
25"
Min. to
Wall
130ϒ Door
Swing
Note: Trims touch at the front.
130ϒ Door
Swing
2"
15"
Clearances for two products installed
side by side with right and left side
hinges together.
Allow 5" minimum between the two products to prevent one
door from striking the other. Additional clearances are required
when using custom handles and panels. NOTE: ZUG2, ZUGSS2 or
ZUGPP2 grille panel kits will not fit this installation.
5"