American Dynamics Matrix Keyboard - Manual (Page 12)

1-4 ADTTE Matrix Keyboard Operator's Manual
24. Site button controls satellite systems.
Refer to the system operating instructions
for additional information.
25. Run (
↑) / Hold (↓) buttons are used with
predefined monitor tours, universal tours,
or alarm tours. Run starts a tour. Hold
halts the tour.
In addition, these buttons serve as the
Cursor Up/Down function during menu
programming.
26. User button allows authorized users to log
on to the system. See the system operating
instructions for additional information.
27. Mon Arm On / Mon Arm Off buttons are
used to enable or disable system alarms
from appearing on monitors. See the
appropriate operating instructions for
specific instructions. This feature is under
keyboard lock protection.
28. Prog button is used to program monitor
tours and other system programming
features. See the system operating
instructions for additional information.
This button is under keyboard lock
protection.
29. F2 button is a function key whose use is
determined by the system to which it is
connected. See the system operating
instructions for additional information.
30. F1 button is a function key whose use is
determined by the system to which it is
connected. See the system operating
instructions for additional information.
This button also serves to set the baud rate
and display the firmware version of the
keyboard. For more information, see
Chapter 4.