GE GFDN120GDWW - Manual (Page 9)

9
About cycle options.
NOTE: Not all features are available on all dryer models. GEAppliances.com
Extended Tumble
Minimizes wrinkles by adding approximately
60 minutes of no-heat tumbling after clothes
are dry. The beeper will sound every two
minutes as a reminder to remove the clothes.
The ESTIMATED TIME REMAINING display will
show 0:00.
The extended tumble time does not get added
to the cycle time on the display
Delay Dry (on some models)
Use to delay the start of your dryer.
1. Choose your dry cycle and any options.
2. Press Delay Dry. You can increase
the delay time in 1 hour increments using
the Delay Dry button.
3. Press the Start pad to start
the countdown.
NOTES:
„ If the door is opened while the dryer is
in Delay Dry, the countdown time will not
restart unless the door is closed and Start
has been pressed again.
e-DRY
Reduces the total energy consumption of
specific dryer cycles by adjusting certain heat
settings.
Note: Cycle times will change when e-DRY is
selected.
This feature can be used with Delicates, Easy
Care, Normal Mixed Loads and Cottons.
Signal
Alerts you that the cycle is complete.
The beeper will continue to sound every
minute for the next 5 minutes, until the
clothes have been removed. The clothes
should be removed when the beeper goes
off so wrinkles don’t set in.
Press Signal to select low, medium or high
volume, or to turn the beeper off.