GE PCR06WATSS - Manual (Page 10)

GROUNDING THE BEVERAGE CENTER
AND WINE CHILLER
IMPORTANT–
Please read carefully.
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY
GROUNDED.
The power cord of this appliance is equipped with a
three-prong (grounding) plug which mates with a standard
three-prong (grounding) wall receptacle to minimize the
possibility of electric shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet is encountered,
it is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
DO NOT, UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO
CONNECT THE REFRIGERATOR TO A
2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.
Installation Instructions
10
STAINING WOOD DRAWER FRONTS
The drawer fronts are unfinished beech wood. During use,
oil from hands may accumulate and stain the wood.
• The drawer fronts may be stained and sealed to match
adjacent cabinetry. The tinted glass will make the stained
wood appear darker. A true color match can be seen only
when the door is opened.
• Apply the stain and sealer according to the
manufacturer’s instructions. To avoid unpleasant odor,
keep the door open to ventilate and allow the stain/sealer
to dry completely before using the product.
• #2 Phillips screwdriver
• Adjustable wrench
TOOLS REQUIRED
• Hardware for changing door swing
• Left and right side hinge covers
• Top screw hole cover
PARTS SUPPLIED
REMOVE PACKAGING
• Remove corner blocks and foam drawer stops.
• Remove all packing material, tape and protective plastic
coverings.
CAUTION:
Small objects are a choke hazard for
children. Remove and discard any parts not used.
1