AT&T 1455 User Manual
Page 14

11
5
When you finish entering the name, press
S or G.
The screen displays
ENTER NUMBER.
6
Enter the telephone number. Use
< to backspace and make
a correction. Press
r to store a pause in the dialing
sequence.
—OR—
Press
r to display the last number dialed from this
phone.
7
Press
S or G to store your entry. The screen displays
DISTINCT RING? and the current setting.
8
Press
< or > to change the setting. Choose Y (for Yes) if you
wish the phone to alert you to calls from this number by changing
to a distinctive ringing pattern after the first ring. Choose
N (for
No) for a normal ringing pattern.
9
Press
S or G to confirm your selection. If you chose
Y in Step 8, a D will be displayed with the directory entry.
Note: When memory is full the screen displays
MEMORY FULL, an error
tone sounds, and you will not be able to store a new number until you
delete a stored number.
Edit a Number/Name Stored in Memory
1
Press
M. The screen displays ENTER 0-9.
2
Press the memory location key of the entry you wish to edit.
3
When the screen displays the number you want to edit, press
S. Then press < or > until EDIT flashes.
4
Press
S. The screen displays the name and number. The
flashing cursor appears at the end of the name. Use
<, > and
the dial pad keys to edit the name. Press
S to move on to
edit the number. Press
S to move on to edit the Distinctive
Ring setting.
5
Press
S to save the edited information.
DIAL E
ED
DI
IT
T ERASE
973-555-0123
TELEPHONE MEMORY
1455_book_1ATT 7/26/01 10:23 AM Page 11