beautypg.com

Before operation setting the clock, Using the stop button – AEG MC2660E User Manual

Page 8

background image

6

Before operation

Setting the clock

Plug in the oven.
1. The oven display will flash:

2. Touch the STOP button the display will show:

To set the clock, see below.

Using the Stop button

Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.

x1

Example: To set the 24 hour clock to 23:35

Choose the 24 hour
clock.

1. Choose the clock

function. (12 hour
clock)

2. Set the hours. Rotate the

TIMER/WEIGHT/PORTION
knob until the correct hour is
displayed (23).

Check the display.

4. Set the minutes. Rotate the TIMER/

WEIGHT/PORTION knob until the
correct minute is displayed. (35).

5. Press the MICROWAVE

POWER LEVEL button to
start the clock.

NOTE:
1.
You can rotate the TIMER/WEIGHT/PORTION knob

clockwise or counter-clockwise.

2. Press the STOP button if you make a mistake during

programming.

3. If the electrical power supply to your microwave

oven is interrupted, the display will intermittently

show after the power is reinstated.
If this occurs during cooking, the programme will be
erased. The time of day will also be erased.

4. When you want to reset the time of day, follow the

above example again.

There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, hold the MICROWAVE POWER LEVEL button down

for 3 seconds.

will appear in the display.

2. To set the 24 hour clock, press the MICROWAVE POWER LEVEL button once

more after Step 1, in the example below

will appear in the display.

x1 and hold for
3 secs.

To set the clock, follow the example below.

3. Press the MICROWAVE

POWER LEVEL button
to change from hours
to minutes.

x1 and hold
for 3 secs.

x1

x1

x1

1. AG-31+32D-EU English 09/11/2005 09:02 Page 6

This manual is related to the following products: