AT&T 9345 - Manual (Page 7)

INSTALLATION
4
3 Charge the handset battery.
Place the handset in the base. Charge the battery for at least 16 hours
the first time.
4 Check for dial tone.
After the batteries are charged, pick up the handset and press
P;
you should hear a dial tone.
5 Set the dial mode.
If you have touch tone service, the phone is ready to use as soon as
the batteries are charged.
If you have dial pulse (rotary) service, you’ll need to change the dial
mode.
•
Press
G on the handset to enter programming mode.
• Press
< or > until the screen displays DIAL TYPE: and the
currently selected mode.
• Press
s. The current setting blinks.
• Press
> to select TONE or PULSE.
• Press
s, to save the displayed mode.
9345_book_1ATT 6/5/01 11:33 AM Page 4