Install the fan heatsink assembly – Asus AP130 User Manual

Page 24

Text mode
Original mode

Chapter 2: Hardware Setup

1. Align and snap the hooks of a

retention bracket into the holes
of the retention module base.
Make sure that the arrow on the
bracket points inward.

2. Follow step 1 to install the other

bracket.

3. When attached to the module

base, flip the brackets sideways
to allow enough room for the fan
heatsink assembly. (See picture
in step 4).

Install the Fan Heatsink Assembly

Hole of rentention
module base

Arrow

Retention module base

The retention module base is already installed on the motherboard
upon purchase. Some CPU fan heatsink packages may also come
with an extra module base.

NOTE