beautypg.com

AutoPage RS-750 User Manual

Page 3

background image

ACTIVE ARMING – LOCK & ARM

1. Press

button on the transmitter.

2. The siren will chirp once and parking light will flash once indicating that the system is now

armed. The vehicle doors will lock upon arming when interfaced with the security system.

Note: The (optional) wireless PIR sensor will take 30 seconds to set up.

System Arm Door Ajar Trunk / Hood Ajar

DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you have left a door,
trunk, or hood lid ajar. (See Feature “I - 4 Programming)

SILENT ARMING / DISARMING: Press the

button on the transmitter, the unit will arm or

disarm your security system, No chirp sound will be heard. Arm / Disarm confirmation will be
through the vehicles parking lights only.

NOISELESS MODE: Press the

button once: The siren chirps once, the system is armed.

Press the

button within 3 seconds: The siren chirps once again, the system is now in

Noiseless mode. In this mode if the SIS-11 shock sensor is triggered the timer will reduced from
60 seconds to 15 seconds. .
The noiseless feature is programmed to activate for one arming cycle only. The security system
will return to normal operation during the next arming cycle.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS:

Press the

button once: The siren chirps once, the system is armed.

Press the

button a second time within 3 seconds: The siren chirps once, the SIS-11 Shock

Sensor is now bypassed.

Press the

button a third time within 6 seconds: The siren chirps two times, the optional PIR

Sensor is now bypassed.
Press the

button a fourth time within 6 seconds: The siren chirps three times, the SIS-11

Shock Sensor and the Optional PIR Sensor are now bypassed.
The sensor bypass feature is programmed to activate for one arming cycle only. The security
system will return to normal operation during the next arming cycle.

HIDDEN ALARM FUNCTION: (For XT-75LCD Only)

Press the

button first then press the

button again within 3

seconds. The security system will arm and activate the “Hidden
Alarm Function”. The siren/horn will be silenced and parking
light/dome light will not flash even if the sensors are triggered in the
armed status. Hidden Alarm Function will send a page to the 2-way
LCD transmitter (XT-75LCD) indicating a status of intrusion. The
vehicle will remain silent.