Conrep –l (load from data file) – HP Scripting Toolkit for Linux 9.60 User Manual
Page 33
Saving configuration data to sl160zconrep.dat.
CONREP Return code: 0
NOTE:
The file names after the -x and -f options must be specified, otherwise, the default file
names conrep.xml and conrep.dat are used, respectively.
NOTE:
A platform specific XML file needs to be used for HP ProLiant 100-series servers. If you
use the default name this may cause an error while running the CONREP utility.
CONREP –l (Load from Data File)
This is an example of usage for HP ProLiant servers not using the Oxx ROM family. To load the
BIOS configuration settings from a previously captured/edited data file (in this case
“sl160zconrep.dat”) to an SL160z G6 server:
[root@ilo002481b08134 conrep]# ./conrep -l -xconrepSL160zg6_20090728.xml -fsl160zconrep.dat
conrep 3.00 - Scripting Toolkit Configuration Replication Program
Copyright (c) 2007-2012 Hewlett-Packard Development Company, L.P.
System Type: ProLiant SL160z G6
ROM Date : 07/28/2009
ROM Family : O33
Processor Manufacturer : Intel
XML System Configuration : conrep_SL160zg6_20090728.xml
Hardware Configuration : sl160zconrep.dat
Loading configuration from sl160zconrep.dat.
ASM values not set! aborting
CONREP Return code: 0
CONREP Data File Sample Contents for HP ProLiant servers not using the Oxx ROM
family
A typical data file generated by CONREP is similar to the following:
Using CONREP
33