HP ProLiant BL10e G2 Server Blade - Manual (Page 27)

To run the ProLiant Support Pack for Windows 2000 software:
1. Click Start>Programs>Pre-Install Features>ProLiant Support Pack.
2. Follow the on-screen instructions when the setup program is launched.
If this link does not launch the setup program:
1. Click Start>Run.
2. Enter the following path in the text box, then click OK:
C:\PSP\SETUP.EXE
3. Follow the on-screen instructions when the setup program launches.
Configuring Network Protocols
The TCP/IP and SNMP services are automatically installed. The Management
Agents for Servers require TCP/IP and SNMP services to communicate with
Insight Manager 7. To disable the SNMP service, refer to the operating system
documentation. Windows 2000 requires TCP/IP to be enabled.
Setting Up Remote Access Server
To use the Remote Access Server (RAS) service with an installed modem:
1. Click Start>Settings>Control Panel>Network.
2. Double-click Dial-up Connections>Make a New Connection.
3. Select the network connection type, and complete the rest of the setup as
prompted.
For more information on required networking parameters, refer to the operating
system documentation.
HP Factory-Installed Operating System Software for Microsoft Windows 2000 Server User Guide 27
HP CONFIDENTIAL
Writer: Michele Richardson File Name: 280154-007.doc
Codename: CTO Part Number: 280154-007 Last Saved On: 10/7/03 2:48 PM