HP ProLiant BL10e G2 Server Blade - Manual (Page 23)

10. Click Next to accept the drive letter assigned by default at the Assign Drive
Letter or Path screen. The Formatting Partition screen appears.
11. Select the appropriate Allocation Unit Size, then enter the Volume Label or
accept the default label. Select either the default NTFS format or the Fat32 file
system format.
12. Select Perform a Quick Format or Format, and click Next.
13. Click Finish at the Completing the Create Partition Wizard screen.
The partition is formatted to the file system that was selected and is labeled
“Healthy” at the completion of the format.
For more information on configuring the new disk drives and upgrading to dynamic
disks, refer to the operating system documentation.
Installing the ProLiant Network Teaming and Configuration Utility
The ProLiant Network Teaming and Configuration (CPQTEAM) Utility allows
multiple network interface controllers (NICs) to be teamed together. You must run
the ProLiant Support Pack to install the CPQTEAM software. For information on
running the ProLiant Support Pack, refer to the “Using ProLiant Support Software”
section in this guide.
IMPORTANT: During the CPQTEAM software installation process, a message might appear,
stating that
The file CPQTEAM.DLL is needed. A default path appears in the
message box. Click OK to accept the path and continue with the installation.
HP Factory-Installed Operating System Software for Microsoft Windows 2000 Server User Guide 23
HP CONFIDENTIAL
Writer: Michele Richardson File Name: 280154-007.doc
Codename: CTO Part Number: 280154-007 Last Saved On: 10/7/03 2:48 PM