HP ProLiant BL10e G2 Server Blade - Manual (Page 20)

Error Messages
After the Lights-Out Management driver is installed, the following errors can occur:
•
In the Device Manager screen, two entries appear for the ATI Video Controller.
One of these entries has a yellow exclamation mark indicating that no driver is
installed.
•
In the Event Viewer, the following message appears:
Unable to map address range for graphics card
These errors result from the Lights-Out Management device and the server using the
same video controller. The operation of the server is not affected by these error
messages.
To disable one entry for the ATI Video Controller and prevent the error messages
from occurring:
1. Right-click the Device Manager entry for the ATI Video Controller that has a
yellow exclamation mark.
2. Click Disable.
After the ATI Video Controller entry is disabled or when the server is rebooted, a
red X appears in place of the yellow exclamation mark. The red X indicates that the
device is disabled. The disabled entry does not affect the operation of the server.
20 HP Factory-Installed Operating System Software for Microsoft Windows 2000 Server User Guide
HP CONFIDENTIAL
Writer: Michele Richardson File Name: 280154-007.doc
Codename: CTO Part Number: 280154-007 Last Saved On: 10/7/03 2:48 PM