HP ProLiant BL10e G2 Server Blade - Manual (Page 14)

Dynamic Disk Upgrade
The operating system is set to be installed on a minimum partition size of 6-GB. On
an array controller, the logical drive size is set to the maximum size of the drive.
Three to 7 MB of space are available on the logical drive of array controllers to
support a dynamic disk upgrade.
NOTE: The dynamic disk upgrade is optional. For information about dynamic disk upgrades,
refer to the operating system documentation. After upgrading to dynamic disk, the emergency
repair disk must be updated.
Post-installation Tasks
This section provides instructions for tasks required after the software installation is
complete.
Logging On to the Server
To log on to the server after completing the initial software installation:
1. Press the Ctrl+Alt+Del keys to display the logon screen. Enter the user name
Administrator .
2. Leave the Password field blank, and click OK.
14 HP Factory-Installed Operating System Software for Microsoft Windows 2000 Server User Guide
HP CONFIDENTIAL
Writer: Michele Richardson File Name: 280154-007.doc
Codename: CTO Part Number: 280154-007 Last Saved On: 10/7/03 2:48 PM