HP ProLiant BL10e G2 Server Blade - Manual (Page 10)

Operating System Installation
To complete the installation of the factory-installed operating system and configure
the server:
1. Power up the server, if not already powered up.
2. Press the appropriate key to continue at the HP Welcome screen. The server
software license screen appears.
3. Read all software license agreements provided with the server.
4. Press the appropriate key to accept the license agreements if you agree with all
the terms and conditions of the license agreements to continue the installation.
Carefully follow the online prompts, making keyboard or mouse entries only when
prompted by the system. Several status screens describing the process that is
occurring appear during the software installation.
CAUTION: The server requires a reboot at the end of the installation. Do not power
down the server at any time during the installation process. Any power interruption
during the installation process could prevent proper completion of the installation and
prevent the operating system from restarting.
NOTE: You can view and print the End-User License Agreement (EULA) after the
installation is complete by clicking Start>Programs>Pre-Install Features>End User
License Agreement.
10 HP Factory-Installed Operating System Software for Microsoft Windows 2000 Server User Guide
HP CONFIDENTIAL
Writer: Michele Richardson File Name: 280154-007.doc
Codename: CTO Part Number: 280154-007 Last Saved On: 10/7/03 2:48 PM