Avenview FO-DVI-1080LC-Set - Manual (Page 6)

www.avenview.com 6
Avenview FO-DVI-1080LC is designed to self detect the resolution of the monitor and change the resolution
accordingly. Follow these steps for connecting to a device:
1. Power on your display
2. Connect Transmitter to the DVI of display
3. Plug the DC power of Transmitter
4. Pull out after about 5 – 10 seconds for reading the EDID information from the display
5. Connect Transmitter to the PC and Receiver to the Display.
6. At the same time, connect DC power to the receiver
7. Connect the optical fiber between Transmitter and Receiver.
8. Restart the computer.
1.8 General Troubleshooting
Problem Possible Solution
No Image

Check if the PC Power is on

Check if connection to the computer and the monitor are
correct.

Turn the PC Power off and on again.
Screen Defects Appear

This product supports up to SXGA resolution.

Check the maximum resolution range of the graphics card.