Avanti EWC28 - Manual (Page 7)

7
OPERATING YOUR WINE CHILLER
 Temperature Control and Light Switch
OFF ON
OFF
HI
MED
LO
 Setting the Temperature Control
 Your Wine Chiller has only one control for regulating the temperature. The temperature control is
located on the upper right hand corner of the compartment.
 To control the internal temperature, adjust the control knob according to the ambient temperature
or purpose of use.
 The first time you turn the unit on, set the temperature control to “HI” position.
 The settings of temperature control are from “OFF” to “HI”. After 2 hours, adjust the temperature
control setting to “MED”. The setting of “MED” should be appropriate for home or office Wine
Chiller use.
NOTE:
 The range between “HI” and “LO” is from 45 F to 65 F, which is ideal for the storage of
wines.
 Turning the temperature control to "OFF" position stops the cooling cycle but does not shut
off the power to the appliance.
You must install your electronic Wine Chiller in a place where the ambient temperature is between 72-
78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 45-65 degrees Fahrenheit may
not be reached.
You can place four bottles on each shelf plus four on the bottom compartment.
Recommended temperatures for chilling wine:
Degrees Control Position
Red Wines:
60-65
 F LO
Dry/White Wines 50-59
 F MED
Sparkling Wines 45-49
 F HI
Rose Wines 49-51
 F MED
 Interior Light
The light switch is located on the upper right hand corner of the compartment. You can turn the
interior light ON or OFF by sliding the light switch from left to right or vice-versa.