AeroGarden Mini 300291 - Manual (Page 10)

9
The AeroGarden Mini Control Panel
See Tending & Harvesting Guide for “Kit-Specific” information
Replace
Grow Bulb
Add
Nutrients
5
Basic Reminders About Your AeroGarden
REMOVE
BIO-DOMES
When plants appear
through the hole in the
Seed Pod Labels, remove
Bio-Domes and discard
or recycle. Do not
remove label.
LIGHTS ON/OFF
Use to occasionally override the built-in light timer. Once pushed, lights will stay off/on until the next time
built-in light timer is set to go on/off. This will not affect the timing of your light cycle and occasional use
of this feature will not harm your plants.
WATER
LEVEL LOW
When Water Level
indicator is RED,
add water to “Fill
To Here.”
ADD NUTRIENTS
When the “Add Nutrients” light is red (every
2 weeks):
Add 1 nutrient tablet and fill the Bowl
with water up to “Fill To Here.”
PRESS AND HOLD the “Lights” button
until the “Add Nutrients” light begins
flashing (about 3 seconds).
Release the “Lights” button, then
IMMEDIATELY press and release the
“Lights” button again to restart the timer.
REPLACE GROW BULB
When the “Replace Grow Bulb” light is red (after
180 days of use):
It is time to replace your Grow Bulb. Replace-
ment bulbs can be ordered from our website
at: www.aerogrow.com.
After replacing Grow Bulb, PRESS AND HOLD
the “Lights” button until the “Replace Grow
Bulb” light begins flashing (about 3 seconds).
Release the “Lights” button, then IMMEDIATELY
press and release the “Lights” button again to
restart the timer.
2
1
3
2
1
3