AEG LAVATHERM T37800 - Manual (Page 25)

Something not working?
If a problem occurs, you can try to solve it yourself following the
instructions below. If you call out an engineer when one of the follo-
wing problems occurs, or to repair a fault due to incorrect use, the call-
out will be charged even if requested within the guarantee period.
Problem Possible cause Remedy
The drier is not working
properly
Mains plug disconnected Plug in mains plug
The “START/PAUSE-MARCHE/PAUSE”
button has not been depressed.
press “START/PAUSE-MARCHE/PAUSE”
button
No programme selected Select programme
Loading door open Close loading door
Fuse or residual current circuit
breaker in fuse box (domestic
installation) faulty
Check fuse or residual current circuit
breaker. Faults can be eliminated by
an electrical engineer
The drying results
are not satisfactory
Wrong programme selected
Select another (time) programme for
the next drying cycle
Lint filter blocked Clean lint filter
Wrong filling quantity Observe recommended filling quantity
Laundry not sufficiently dried Pre-dry laundry sufficiently
Deposit on the drum inner surface-
or on the drum ribs
Clean drum inner surface and drum
ribs
25
Something not working?
37800_UK.qxp 7/1/2005 2:44 PM Page 25