Atlantic Technology IWTS-30 SR - Manual (Page 2)

Specs
IWTS-30 SR IWTS-14 SR
THX Certification THX Ultra NA
Type 2-way Dipole/Bipole 2-way Dipole/Bipole
Switchable Switchable
Drivers Woofer (2) 5¼” (135mm) GLH* (2) 4½” (115mm) GLH*
Tweeter (2) 1” (25mm) soft dome (2) 1” (25mm) soft dome
Frequency Response
80Hz – 20kHz ±3dB 100Hz – 20kHz ±3dB
Nominal Impedance 6 Ohms 6 Ohms
Crossover Frequency 3500Hz 4000Hz
Sensitivity 87dB 87dB
Recommended 25–150 Watts RMS 25-125 Watts RMS
Amplifier Power
Overall Dimensions
15 5 ⁄
8
x 12 1 ⁄
8
x 3¾” 15 5 ⁄
8
x 12 1 ⁄
8
x 3¾”
(W x H x D) 397 x 308 x 96mm 397 x 308 x 96mm
Cutout Dimensions 14¼ x 10¾” 14¼ x 10¾”
(W x H) 362 x 273mm 362 x 273mm
Optional PreConstruction IN-NC-14/30 SR IN-NC-14/30 SR
Bracket
Weight (ea)
9lbs; 4.1kg 8lbs; 3.7kg
*Graphite Loaded Homopolymer
The IWTS-14 SR and
30 SR both utilize the
familiar dog-leg mounting
procedure for quick,
efficient installation. They
are sized to fit within
standard 16”-on-center,
2 x 4 stud construction,
without the need for any
special modifications.
New construction brackets
(IN-NC-14/30 SR) are
also available.
Gold plated connectors
Audiophile-grade crossovers
Paintable grille and frame
Front -mounted dipole/bipole switch
IWTS-30 SR
©2008 Atlantic Technology • 343 Vanderbilt Ave.
Norwood, MA 02062 • 781.762.6300
www.atlantictechnology.com 2.08
Atlantic Technology is a registered trademark of Atlantic Technology
International. Specifications subject to change without notice.
IWTS-14&30 SR In-Wall Surrounds