Hardware setup, Asus a7v-m user’s manual 37 – Asus JUMPERFREE A7V-M User Manual
Page 37
ASUS A7V-M User’s Manual
37
3. HARDWARE SETUP
Connectors
3. H/W SETUP
18) USB Header (10-1 pin USB2)
If the USB port connectors on the back panel are inadequate, this USB header is
available for two additional USB port connectors. Connect the USB headers to
the 2-port USB connector set and mount the bracket to an open slot on your
chassis.
A7V-M USB Port
1
5
6
10
1: USB Power
2: USBP2–
3: USBP2+
4: GND
5: NC
6: USB Power
7: USBP3–
8: USBP3+
9: GND
USB2
A7V-M
19) SMBus Connector (5-1 pin SMB)
This connector allows you to connect SMBus (System Management Bus) de-
vices. SMBus devices communicate by means of the SMBus with an SMBus
host and/or other SMBus devices. SMBus is a specific implementation of an I
2
C
bus, which is a multi-device bus; that is, multiple chips can be connected to the
same bus and each one can act as a master by initiating data transfer.
A7V-M SMBus Connector
SMBCLK
Ground
+5V
1
SMB
A7V-M