AEG LAVAMAT W 1255 - Manual (Page 21)

Operating Instructions
21
Setting the delay timer
The b (DELAY TIMER) button allows you to delay the start of a wash
programme.
0 Press the b (DELAY TIMER) button once if you
would like the wash programme to start in six
hours. The 6h display will illuminate.
0 Press the b (DELAY TIMER) button twice if you
would like the wash programme to start in
three hours. The 3h display will illuminate.
Press the b (DELAY TIMER) button once more
if you would like to cancel the delay timer. The
display will go out.
3 The delay timer that you have set is only activated when the wash pro-
gramme is started by pressing the O/s (START/PAUSE) button.
Note: If the delay timer has been set for six hours, the 6h display will
illuminate. After a period of 3 hours this display will change and the 3h
display will illuminate. The wash programme will start after a total of
6 hours.
Starting the Wash Programme
0 1. Check that the water tap is open.
2. To start the wash programme, press the O/s (START/
PAUSE) button. The wash programme starts.
3 If L (END) flashes 4 times when the O/s (START/
PAUSE) button is pressed, the door is not closed properly. In this case,
push the door in firmly, and press O/s (START/PAUSE) again.
Programme Progress
Programme Progress Display
Prior to the start, the programme steps chosen
are displayed by the programme progress display.
During the wash programme, the current programme
step is displayed.