AT&T 993 2-Line - Manual (Page 58)

55
Call history
Call history operation
Dial a number from call history
When reviewing call history records, you can dial a
displayed telephone number. If you have already entered
the home and local area codes as mentioned on page
26, the telephone numbers shown in the
Call history will
already be displayed correctly.
Locate the desired number in call history (see Call
history operation on page 53).
Press
ENTER. The screen displays DIAL.
Press ENTER. The telephone automatically selects an
idle line and dials the displayed number.
— OR —
Lift the handset or press
SPEAKER or HEADSET, then
press ENTER. The telephone automatically selects an
idle line and dials the displayed number.
— OR —
Press the
LINE button for the desired line and press
ENTER to place the call.
The desired number is dialed in the preferred mode
(speakerphone or headset) programmed (see
Set
preferred mode on page 2).
NOTE: To exit without dialing, press until the screen displays
RETURN TO LIST, then press ENTER.
Dial options
You can change the format of a number in call history
before dialing.
Follow the directions in Steps 1 and 2 of Dial a
number from call history above. The screen displays
DIAL.
Press until the screen displays
DIAL ALTERNATE.
Press or to scroll through the alternate dialing
formats (seven-digit number, area code + seven-digit
number, + area code + seven-digit number, or +
seven-digit number). The screen displays the alternate
formats on the third line.
When the desired format is displayed, dial the call
as described in
Step 3 of Dial a number from call
history above.
.
2.
3.
.
2.
3.
4.
0:27 AM /2
JOHN SMITH
57754
DIAL
0:27 AM /2
JOHN SMITH
57754
DIAL ALTERNATE