beautypg.com

Accessories, Refrigerator compartment, Freezer compartment – Hotpoint Ariston MBL 1911 F/HA User Manual

Page 15

background image

GB

15

*

Available only on certain models.

Accessories

Refrigerator compartment

SHELVES: with or without grill.

Due to the special guides the

shelves are removable and the

height is adjustable (see

diagram), allowing easy storage

of large containers and food.

Height can be adjusted without

complete removal of the shelf.

MULTI-USE

*

bin: to store food

(such as cold meats) for a long

time and also prevent odours

from lingering in the refrigerator.

It can be removed for use and it

may be shifted sideways to

optimise space (see diagram).

FRESH BOX

*

: for fresh meat and fish. Due to the

compartment’s low temperature (the coldest in the

refrigerator) and to the clear door that provides

protection against oxidation and blackening, food can

be stored for even up to one week. It can also be used

for “cold meals.”

1

2

CAN RACK shelf: stores cans

horizontally (see diagram).

Yoghurt, butter or general

containers may also be stored

here.

ODOUR FILTER

*

: Some

models are fitted with a new

odour filter with active carbons,

which ensures better air quality

inside the refrigerator.

The filter is located on the bottom

right-hand side, inside the

ventilation opening (see diagram).

Freezer compartment

ICE CARE tray

The fact that they are situated on the top part of the

freezer drawers ensures greater cleanliness: the ice no

longer comes into contact with the food placed inside

the freezer compartment; furthermore, the dripping of

the water during filling is avoided (a lid to cover up the

hole after filling with water is also provided).

1. Pull out the tray by pushing it up.

Check that the tray is ompletely empty and fill it with

water through the opening provided.

2. Take care not to exceed the level indicated (MAX

WATER LEVEL). Excess water prevents the ice cubes

from dispensing (if this happens, wait for the ice to

melt and empty the tray).

3. Turn the tray 90°: due to the connected compartments

each mould fills with water (see diagram).

4. Close the opening with the lid provided and put the

tray back.

5. When the ice has formed (minimum time

approximately 8 hours) knock the tray against a hard

surface and wet the outside so that the ice cubes

come loose and take them out through the opening.

WATER LEVEL

MAX

W

A

TER LEVEL

MAX

W

A

TER LEVEL

MAX

This manual is related to the following products: