Amana W101611016 - Manual (Page 11)

10
C ARE AND CLEANING
R
EVERSE THE DOOR
Control Panel - Clean with a soft, damp cloth. Do
not use abrasive substances. Do not spray cleaners
directly on the panel.
The control panel finish could be damaged by some
laundry pre-treatment soil and stain-remover products.
Apply such products away from the dryer and wipe up
any spills or oerspray immediately.
Tumbler - Remove any stains such as crayon, ink pen
or fabric dye (from new items such as towels or jeans)
with an all-purpose cleaner. Then tumble old towels or
rags to remove any excess stain or cleaning substance
.
Once these steps are done, stains may still be visible,
but should not transfer to subsequent loads.
Dryer Exteriorr - Clean with a soft, damp cloth. Do
not use abrasiv e substances. Protect the surface from
sharp objects.
Dryer Exhaust System - Should be inspected and
cleaned once a year to maintain optimum performance.
The outside exhaust hood should be cleaned more fre-
quently to ensure proper operation. (Refer to the
Installation Instructions for more information.)
Instructions for reversing the dryer door:
1) Remove 2 hinge screws holding door hinge in place.
2) Remove the door and lay carefully aside.
3) Remoe 2 hinge screws on the opposite side of door hinge.
4) Remoe 2 screws on the door catch plate.
5) Move door catch plate to opposite side and attach with screws.
6) Move the door to the opposite side and replace 2 hinge screws.
7) Replace 2 hinge screws in opposite holes.
DC68-02031B-01 B-03-06 3/20/06 2:04 PM Page 11