LG ARNU24GCFA2 - Manual (Page 140)

8 beltéri egység
Kezelési útmutató
A vezetékes távvezérlő (opcionális) és funkciói
Hűtés üzemmód
Automatikus mód vagy automatikus átváltás
Páramentesítés üzemmód
Fűtés üzemmód
Ventilátor-üzemmód
• Hűtő típus( ), Hőszivattyús típus( )
Üzemmód
PQWRCDF0 (csak hűtő)
PQWRHDF0 (hőszivattyús)
2
3
4
1
5
9
7
6
8
10
12
13
14
15
17
16
11
1. VANE ANGLE Button
Used to set each vane angle.
2. FUNCTION SETTING Button
Used to set or clear Auto Clean, Smart Clean, Elec-
tric heater or Individual vane angle control.
3. ON/OFF Button
Used to turn on/off the unit.
4. JET COOL Button
Speed cooling operates super high fan speed.
5. LEFT/RIGHT AIRFLOW Button (OPTIONAL)
Used to set the desired left/right(horizontal) airflow
direction.
6. UP/DOWN AIRFLOW Button
Used to stop or start louver movement and set the
desired up/down airflow direction.
7. ON TIMER Button
Used to set the time of starting operation.
8. SLEEP TIMER Button
Used to set the time of sleeping operation.
9. SET / CLEAR Button
Used to set/clear the timer.
Used to set the current time(if it input for 3sec.)
10. PLASMA Button (OPTIONAL)
Used to start or stop the plasma-purification func-
tion.
11. ROOM TEMPERATURE SETTING Button
Used to select the room temperature.
12. OPERATION MODE SELECTION Button
Used to select the operation mode.
13. INDOOR FAN SPEED SELECTION Button
Used to select fan speed in four steps low,
medium, high and chaos.
14. ROOM TEMPERATURE CHECKING Button
Used to check the room temperature.
15. OFF TIMER Button
Used to set the time of stopping operation.
16. TIMER SETTING(Up/Down)/LIGHT Button
Used to set the timer.
Used to adjust the brightness.(if it is not time adjust
mode)
17. RESET Button
Used to reset the remote controller.