I n s ta l l at i o n – AT&T 1430 User Manual
Page 7
I N S TA L L AT I O N
4
3
Charge the handset battery.
Place the handset in the base. Charge the battery for at least 12 hours
the first time.
4
Check for dial tone.
After the batteries are charged,pick up the handset and press
;
you should hear a dial tone.
5
Set the dial mode.
If you have touch tone service,the phone is ready to use as soon as
the batteries are charged.
If you have dial pulse (rotary) service, you’ll need to change the dial
mode.
•
Press
on the handset to enter programming mode.
•
Press
or
until the screen displays
and the
currently selected mode.
•
Press
. The current setting blinks.
•
Press
to select
or
.
•
Press
, to save the displayed mode.
6
Set the Time and Date.
•
Press
until
is displayed. Press
.
•
The month is flashing. Use
and
to select the current month.
Press
.
•
The day is flashing. Use
and
to select the correct day.
Press
.
•
The hour is flashing. Use
and
to select the current hour.
Press
.
•
The minute is flashing. Use
and
to select the correct minute.
Press
.
•
or
is flashing. Use
and
to choose between
and
. Press
.
1430_book_2ATT-mk1(DEC21) 5/16/02 5:47 PM Page 4