LG GR-181LA - Manual (Page 13)

Care and Maintenance
Going away
General information
Lamp Replacing
When you plan to be away for an extended period,
remove all food, disconnect the power cord, clean the
interior thoroughly, and leave the door OPEN to prevent
odor formation.
Power failure Most power failures are corrected in an hour or two and
will not affect your refrigerator temperatures. However,
you should minimize the number of door openings while
the power is OFF.
If you move Remove all items inside the refrigerator or securely fasten
all loose items. To avoid damaging the leveling screw,
turn them all the way into the base.
Unplug the power cord from the AC outlet.
1. Take the shelves out
to make access
easier.
2. Hold the cover lamp,
take it out softly from
the thermostat
enclosure with twisting up and down.
3. Turn the lamp counterclockwise, and replace it
(max 15W, 220~240V)
4. Assemble in reverse order of disassembly.
Replacement bulb must be the same specification as
original.
Anti-condensation
pipe
• The Anti-condensation pipe is
installed around the front side
of fridge-larder to prevent
dewing.
• Especially after installation or
when ambient temperature is
high, the fridge-larder may
feel hot, which is quite normal.
Anti-Condensation
Pipe
0
4
2
6
1
5
3
7
14