English – Arcam FMJ CD37 User Manual

Page 5

E-5

English

��

�

��

��

��

��

Coaxial digital output

Use this socket if you are using a separate digital

to analogue converter (DAC) or digital recorder.

Connect to the DAC or recorder’s digital input

using a suitable 75

Ω

screened cable.

CAUTION: Never connect the digital output

socket to a conventional audio input.

Analogue audio outputs

Connect these to your amplifier’s CD (or other

line-level) input using suitable high quality

interconnect cables. Ensure that the left and

right audio outputs from the CD player are

connected to the same left and right inputs on

your amplifier.
The second set of sockets can be used to connect

to a second amplifier set up for multi-room use.

Power inlet

Connect the correct

mains cable here.

Voltage select

Ensure the voltage selected matches

the local power supply.

Optical digital output

Use this socket if you are using a

separate DAC or digital recorder with

an optical connection. Connect using a

suitable optical cable.

Remote in

This allows remote-control signals

to be received by the CD37 if

the remote sensor is covered

(or otherwise not ‘visible’ to the

remote-control).

See page 7 for more information.

12V trigger input

This socket allows the CD37 to be switched on

remotely by an amplifier (or another item of AV

equipment) with a

12V trig out

function.