LG LTN16385PL - Manual (Page 11)

10
USING YOUR REFRIGERATOR USING YOUR REFRIGERATOR
ENSURING PROPER AIR CIRCULATION
In order to obtain stable temperature, the air must flow
between the freezer and refrigerator sections. As shown
in the illustration below, the cold air enters through
the bottom part and circulates upward. This air returns
below the freezer floor and the rest of the air enters the
refrigerator section through the top vent.
DO NOT block any of these vents with packages of food.
This can interrupt the flow of air and cause temperature
and moisture problems.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer
to the other. You must thoroughly clean both sections to
eliminate odors. To prevent odor transfer and drying out
of food, make sure you wrap or cover foods tightly (See
the “Food Storage Guide” section for details).
NOTE: If you close the fresh food compartment door
applying more force than necessary, freezer door may get
open and close again, due internal air flow of refrigerator.
ADJUSTING THE CONTROLS
• Your refrigerator has two controls that allow you to
regulate the temperature the freezer and refrigerator
compartments.
• Refrigerator Control
Initially set the Refrigerator
Control on the middle
setting (number 3). For
doing this, press the
button until the third light
is on. This temperature is
the recommended one for the optimum refrigerator
performance.
Leave the refrigerator on this setting for 24 hours to
reach the correct temperature. After 24 hours, adjust the
compartment temperature as you desire. ALWAYS wait
24 hours before you adjust the temperature. If you want
to set the refrigerator compartment temperature to a
warmer temperature than the current, continue pressing
the button until it reaches the desired temperature.
Press the button repeatedly
until the desired LED is lit.
The first LED (Cold) is for
the highest refrigerator
temperature and the
last LED (Colder) is for
the coldest refrigerator
temperature.
• Freezer Control
The freezer control should
come from factory on the
middle setting (number
5). Wait 24 hours before
adjusting the freezer
compartment temperature.
Roll the knob to set the
freezer temperature as you
desire. ALWAYS wait 24 hours
after any adjustment to reach
the desired temperature.
Turn the dial until the desired number is selected. The
higher the number, the colder the temperature.
Cold Temperature
FREEZER TEMPERATURE CONTROL
(CONTROL DE TEMPERATURA CONGELADOR)
COLD / MENOS FRIO
RECOMMENDED / NORMAL
COLDER / MAS FRIO
1
5
9
Colder Temperature
FREEZER TEMPERATURE CONTROL
(CONTROL DE TEMPERATURA CONGELADOR)
COLD / MENOS FRIO
RECOMMENDED / NORMAL
COLDER / MAS FRIO
1
5
9
REFRIGERATOR TEMPERATURE CONTROL
COLD COLDER
(CONTROL DE TEMPERATURA REFRIGERADOR)
(MENOS FRIO) (MAS FRIO)
REFRIGERATOR TEMPERATURE CONTROL
COLD COLDER
(CONTROL DE TEMPERATURA REFRIGERADOR)
(MENOS FRIO) (MAS FRIO)
REFRIGERATOR TEMPERATURE CONTROL
COLD COLDER
(CONTROL DE TEMPERATURA REFRIGERADOR)
(MENOS FRIO) (MAS FRIO)
FREEZER TEMPERATURE CONTROL
(CONTROL DE TEMPERATURA CONGELADOR)
COLD / MENOS FRIO
RECOMMENDED / NORMAL
COLDER / MAS FRIO
1
5
9