LG E2360V-PN - Manual (Page 8)

7
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution.
A Connect D-sub(Analog signal) Cable
1.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect signal input cable and power cord in order, then tighten the screw
of the signal cable.
Connecting with the PC
1 2
3.
Press the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Connecting the Display
E1960S/E2060S/E2260S/E2360S
A
Mac adapter : For Apple Macintosh use,
a separate plug adapter is needed to
change the 15 pin high density (3 row) D-
sub VGA connector on the supplied cable
to a 15 pin 2 row connector.
When using a D-Sub signal input cable
connector for Macintosh
Wall-outlet type
Varies according to model.
Power Button
Connect the signal
input cable and
tighten it up by
turning in the
direction of the
arrow as shown in
the figure.