LG BH4120S - Manual (Page 24)

3 System Setting
System Setting 24
S
ys
tem Se
tting
3
Settings
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language, speaker setup on the initial setup
wizard.
1. Press 1 (POWER).
The initial setup wizard appears on the screen.
2. Use W/S/A/D to select a display language
and press ENTER (b).
3. Press ENTER (b) to verify the test tone signals of
the speakers.
After verifying the test tone signals, press ENTER
(b) while [Stop] is highlighted. Select [Next]
and press ENTER (b).
4. Check all the settings that you have set in the
previous steps.
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use A/D to select
[Previous] and press ENTER (b).