LG E2281VR-BN - Manual (Page 7)

6
Connecting the Display
E2281TR
A
B
Connect DVI-D(Digital signal) Cable
Connect D-sub(Analog signal) Cable
1.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect signal input cable and power cord in order, then tighten the screw
of the signal cable.
Connecting with the PC
1 2
Wall-outlet type
Varies according to model.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
DVI-D (This feature is not
available in all countries.)
Connect the signal
input cable and
tighten it up by
turning in the
direction of the
arrow as shown in
the figure.
Mac adapter : For Apple Macintosh use,
a separate plug adapter is needed to
change the 15 pin high density (3 row) D-
sub VGA connector on the supplied cable
to a 15 pin 2 row connector.
When using a D-Sub signal input cable
connector for Macintosh