AEG 34350 I - Manual (Page 11)

11
Level 1
If your water is "level 1" it is already soft and therefore there is no need to
use salt.
Level 2
If your water hardness is "level 2", only regenerating salt will be necessary. It
is not necessary to set the water hardness level on the machine.
Levels 3 and 5 (water softener adjustment)
If your water is level 3 or 5, proceed as follows:
1. slide out the lower basket and unscrew
the cap of the salt container;
2. turn the two-position selector
anticlockwise from position - to
position + with the aid of a blunt
knife or a screwdriver.
Levels 4 and 5 (adjustment on the machine)
If your water is level 4 or 5, open the door
and turn the selector on the upper left-
hand corner of the machine from position
1 to 2.
With a water hardness of level 5 both adjustments must be made.
AA01
1 2
AA03
152985 45/2 en-es 5-09-2000 8:38 Pagina 11