Registering magic remote control, How to use magic remote control, Precautions to take when using the – LG 47LM6200 User Manual
Page 30: Magic remote control, English
30
ENG
ENGLISH
REMOTE CONTROL
Registering Magic Remote Control
The Magic remote Control operates by pairing with
your TV. Once you purchased the TV, please
register the Magic remote control as follows;
How to register the Magic Remote Control
HOME
BACK
VOL
CH
My APPS
To register the remote control, press
the
Wheel (OK) button on the remote
control.
How to Re-register the Magic Remote Control
after Registration Failure
BACK
HOME
BACK
VOL
CH
My APPS
HOME
BACK
VOL
CH
My APPS
HOME
1 Press and hold the
BACK
HOME
BACK
VOL
CH
My APPS
and
HOME
HOME
BACK
VOL
CH
My APPS
buttons together for 5
seconds to reset, then register it
by following “How to register the
Magic remote control” above. (Once
the reset is complete, the light on
the Pointer blinks.)
2 To re-register the Magic remote
control, press and hold the
BACK
HOME
BACK
VOL
CH
My APPS
button for 5 seconds toward the TV.
(Once the reset is complete, the
light on the Pointer blinks.)
How to use Magic Remote
Control
1 If the pointer disappears, move
the remote control slightly to left
or right. Then, it will automatically
appear on the screen.
y
»
If the pointer has not been used
for a certain period of time, it
will disappear.
2 You can move the pointer by
aiming the Pointer Receiver of
the remote control at your TV
then move it left, right, up or
down.
y
»
If the pointer does not work
properly, leave the remote
control for 10 seconds then use
it again.
Precautions to Take when Using
the Magic Remote Control
y
y
Use the remote control within the maximum
communication distance (10 m, 32.8ft).
Using the remote control beyond this
distance, or with an object obstructing it,
may cause a communication failure.
y
y
A communication failure may occur due to
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
Remote Control.
y
y
The Magic Remote Control may be damaged
or may malfunction if it is dropped or
receives a heavy impact.
y
y
Take care not to bump into nearby furniture
or other people when using the Magic
Remote Control.
y
y
Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
y
y
It is recommended that an Access Point (AP)
be located more than 1 m (3.28 ft) away
from the TV. If the AP is installed closer than
1 m (3.28 ft), the magic remote control may
not perform as expected due to frequency
interference.
MFL67468132_00.indb 30
2012-02-07 �� 1:40:35