LG LH-E922PB - Manual (Page 18)

18
Mini Glossary for Audio Stream
& Surround Mode
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
means identical to the original masters) and results in
exceptional clarity throughout a true 360 degree sound field.
“DTS” and DTS Digital Surround” are registered trademarks of
Digital Theater Systems, Inc. Manufactured under license from
Digital Theater Systems, Inc.
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
program source. If you play DVDs with “
” mark, you can
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
Use this mode when playing movie or Dolby Digital 2 channel
which carries the “ ” mark. This mode provides the
effect of being in a movie theatre or live concert house-an
effect with an intensity which can only be obtained through
DOLBY PRO LOGIC SURROUND. The effect of the
front/back/left/right movement of the sound image, as well as
the sense of fixed position in the sound image, is much
clearer and more dynamic than before.
(II)
Dolby Pro Logic II creates five full-bandwidth output channels
from two-channel sources. This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds or tonal colorations.
MOVIE mode:
The Movie mode is for use with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
MUSIC mode:
The Music mode is for use with any stereo music recordings.
MATRIX mode:
The Matrix mode is the same as the Music mode except that
the directional enhancement logic is turned off. It may be used
to enhance mono signals by making them seem “larger.” The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise
cause disturbing surround signals from a logic decoder. The
ultimate “cure” for poor FM stereo reception may be simply to
force the audio to mono.
3D SURROUND
This unit can produce a 3D Surround effect, using 3D
Surround Sound technology, which simulates multi-channel
audio playback from two conventional stereo speakers
instead of the five or more speakers normally required to
listen to multi-channel audio from a home theatre. This
feature works with DVD discs encoded with Dolby Pro Logic
and Dolby Digital audio tracks.
BYPASS
Software with multichannel surround audio signals is played
according to the way it was recorded.
Sound Mode
You can enjoy surround sound simply by selecting
one of the pre-programmed sound fields according to
the program you want to listen to.
Press SOUND button repeatedly.
The sound mode is changed in the display window in
the following order.
BYPASS
→ ON STAGE → STUDIO → CLUB → HALL
→ THEATER 1 → CHURCH → PL ll MOVIE →
PL ll MUSIC → PL ll MTRX → BYPASS...
(This function available 2-channel mode only)
When DVD is inserted.
You can change the audio mode of DVD (Dolby Digital, DTS,
PRO LOGIC, etc) by pressing the AUDIO button on the
remote during playback.Although the DVD contents differ
from disc to disc, the following explains the basic operation
when this feature is used.
Each time you press AUDIO button, the audio mode of DVD
is changed as the following order;
→ → or
For your reference
• Initial sound mode is BYPASS.
• You can identify the encoding format of program
software by looking at its packaging.
- Dolby Digital discs are labeled with the
logo.
- Dolby Surround encoded programs are labeled
with the logo.
- DTS Digital Surround discs are marked with DTS.
Note:
Depending on the disc, some of the DVD audio mode may
not be availabe.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
VIRTUAL sound
Press VSM the setting VIRTUAL sound.
3D STEREO
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
Multichannel sound
The Multichannel sound changes the sound in 5.1
ch into a virtual one in the 10.1 ch so that it
provides such a feeling that you listen to the sound
simultaneously from the right and left speakers and
center speaker.
Source Display Effect
2.1 ch. VIRTUAL 3D STEREO
5.1 ch VIRTUAL Multichannel sound