LG DLE2515S User Manual

Page 14

1 3

Part 4

ACESSORIES INSTALLATION

To ensure safe and secure installation, please
observe the instructions below.

Place washer firmly on a stable, even and
solid floor as product installation instructions
describes in owner’s manual.

Peel protective paper off the tape from the
stacking kit side bracket.

Fit the stacking kit side bracket firmly to the
side of top plate by attaching the double-
faced tape to top plate as picture shows.

Secure stacking kit side bracket to the
washer with a screw on the back of bracket.
Repeat Steps 2, 3, 4 for the other side.

Place the dryer on top of the washer by fitting
legs as shown in the picture. Avoid finger
injuries - be careful not to pinch fingers
between the washer and dryer. Slide washer
slowly backwards to the stopper of kit.

Insert the front stacking kit. Push the front
stacking kit back to the stoppers of side
stacking kit.

Screw both sides of the front kit.

• Do not use stacking kit with a gas dryer in

potentially unstable conditions like a mobile
home.

Stacking kit

Do not attempt installation with one person.

Incorrect installation procedure can cause
serious accidents and physical Injuries.

The weight of the dryer and the height of
installation makes the stacking procedure
too risky for one person. This procedure
should be performed by 2 or more
experienced service personnel.

W A R N I N G

Stacking Kit Installation Instructions