LG DLGX2656V - Manual (Page 12)

Position the dryer in the final location. Place
a level across the top of the dryer.
1
Level
Leveling Feet
Use an adjustable wrench to turn the leveling
feet. Turn clockwise to raise the dryer or
counterclockwise to lower it. Raise or lower
the leveling feet until dryer is level from
side to side and front to back.
Make sure that all 4 leveling feet are in firm
contact with the floor.
2
• All four leveling feet must rest solidly on the
floor. Gently push on the top corners of the
dryer to make sure that the dryer does not
rock from corner to corner.
If you are installing the dryer on the optional
pedestal, you must use the leveling feet on the
pedestal to level the dryer. The dryer leveling feet
should be fully retracted.
OPTIONAL ACCESSORIES
For these and other LG products, contact your local LG dealer, or visit our Web site at www.lg.com.
Stacking kit
(sold separately)
Pedestal
(sold separately)
LEVELING THE DRYER
To ensure that the dryer provides optimal drying
performance, it must be level. To minimize
vibration, noise, and unwanted movement, the
floor must be a perfectly level, solid surface.
NOTE: Adjust the leveling feet only as far as
necessary to level the dryer. Extending the
leveling feet more than necessary can cause
the dryer to vibrate.
WARNING
• To reduce the risk of injury to persons , adhere
to all industry recommended safety procedures
including the use of long sleeved gloves and
safety glasses.
• The appliances are heavy. Two or more people
are required when installing the dryer.
• Failure to follow all of the safety warnings in this
manual could result in property damage, injury
to persons or death.
w
12
MFL67408111_EN_120416.indd 12 2012.4.16 9:18:36 AM