LG LSC27910SB - Manual (Page 10)

• Do not block any of these vents with food packages.
If the vents are blocked, airflow will be interruped and
temperature and moisture problems may occur.
IMPORTANT:
Because air circulates between both sections, any odors
formed in one section will transfer to the other. You must
thorougly clean both sections to eliminate odors.
To prevent odor transfer and drying out food, wrap or
cover foods tightly. (See the Food Storage Guide
section for details.)
Note: If you
close the
refrigerator
forcefully, the
freezer
door may open
and close again
due to pressure
from internal air
flow.
NEXT
1. Clean your refrigerator thoroughly and wipe off dust
accumulated during shipping.
2. Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3. Let your refrigerator run for at least 2 or 3 hours
before putting food in it. Check the flow of cold air in
the freezer compartment to ensure proper cooling.
Your refrigerator is now ready for use.
USING YOUR REFRIGERATOR
ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections. As shown
in the illustration below, cool air enters through the
refrigerator of the freezer section and moves up. Most of
the air then flows through the freezer section vents and
recirculates under the freezer floor. The rest of the air
enters the refrigerator section through the top vent.
10
CONTROL PANEL FEATURES
Display Off Mode
The display lights up and stays lit when the refrigerator
is plugged in. You can change the display so that it lights
up only when the door is opened. Press "FRZ TEMP" and
"ICE PLUS" buttons at the same time for 5 seconds. A
tone will sound indicating that the display is Off. Once in
Display Off mode, display only lights when door is
opened or display button is pressed. Display turns off 30
seconds after door is closed or by pressing display
button a second time. Deactivate Display Off Mode in
same manner as activation.
REFRIGERATOR AND FREEZER
CONTROLS:
Initially set the refrigerator and freezer controls to the
recommended (middle) settings by pressing
(REF.TEMP Graphic) and (FRZ. TEMP Graphic).
NOTE: When changing control settings, wait 24 hours
before making additional adjustments. After 24 hours,
adjust the compartments temperatures as desired. The
more lit bars, the colder the refrigerator and freezer
will be.