LG 50PM680S - Manual (Page 7)

A-4 SETTING UP THE TV
CAUTION
y When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
y Make sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
Do not fasten the screws with too much
force; otherwise they may be worn out and
get loosened.
Tidying cables
1 Install the Power Cord Holder and Power Cord.
It will help prevent the power cable from being
removed by accident.
2 Gather and bind the cables with the Cable
Holder. Install the LAN Cable as shown to
reduce the electromagnetic wave.
CAUTION
y Do not move the TV by holding the cable
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
To detach the stand,
1
42/50PM47**, 50/60PM67**
M4 x 30
4EA
50/60PM68**, 50/60PM97**
M4 x 30
4EA
2
Protection Cover
3
M4 x 30
2EA
Power Cord Holder
Cable Holder
NOTE
y When installing the wall mounting bracket,
use the Protection Cover.
y This will protect the opening from
accumulating dust and dirt.
y Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.