Abbott Diabetes Care FreeStyle Flash Blood Glucose Monitor - Manual (Page 33)

30
Note: To ensure accurate test results, make sure the code number on
your meter display always matches the code number in the box out-
lined in blue, located on the side of the test strip vial.
Caution: Take care to not press the “c” or “m” buttons when
you are holding the meter while performing the blood test. If you
do, you might change the code and get an incorrect reading or an
Error 6.
b. When you see the word “COdE” and a code number on the display
screen, use the “c” (configure) button to scroll forward or the “m”
(mode) button to scroll backward until the number matches the
number on your test strip vial. The FreeStyle Flash
™ Meter has a
total of 50 codes.
c. After you set your code number, the Blood Drop and Test Strip
symbols will alternate on the display screen.
d. If you want to return to the code number display screen after the
Blood Drop and Test Strip symbols appear, press the “c” button.
2. Code Number 3. Blood Drop and Test Strip Symbols