Audiovox LCM580NAV - Manual (Page 2)

Setting monitor
3
En
gl
is
h
Setting monitor
The colour display is equipped with OSD prompting for the monitor settings.
Invoking OSD menu
— Briefly press the MENU button at the top of the monitor.
The OSD menu “Navigation Settings” is displayed.
In the OSD menu you can carry out the following settings:
• Volume: Volume level of the built-in monitor loudspeaker
• Brightness: Brightness of the display
• DisplayMode: Screen display; the selected setting is indicated with a yellow
bar. Possible selections include:
“Full Screen” (16:9)
“Normal” (4:3)
Adjusting settings
— Press the MENU button until the desired menu item appears.
— Carry out the desired setting with the
+
or
-
buttons.
If necessary, invoke the next menu item by pressing the MENU button and carry out
the settings.
ஊ
If you use the built-in monitor loudspeaker leave the volume level in the OSD
menu on the middle setting. Adjust the volume level for the audible messages of the
navigation system only with the
+
or
-
buttons on the remote control.
ஊ
The volume level of the built-in monitor loudspeaker can also be set without
invoking the OSD menu. To do so:
— Press + or - button on the monitor.
The display automatically changes to the menu for setting the volume level.
— Set the volume as required.
Quitting OSD menu
To quit the OSD menu press the MENU button until the menu is hidden.
ஊ
If a button has not been pressed for several seconds, then the OSD menu is auto-
matically hidden again.
US_02_operations.fm Seite 3 Montag, 19. März 2001 10:57 10