Setting up your all-in-one pc, Connecting the wired keyboard and mouse, Connecting the wireless keyboard and mouse – Asus ET2411IUTI User Manual

Page 26

English

All-in-one PC ET2411/ ET2210 Series

Setting up your All-in-one PC

Connecting the wired keyboard and mouse

Connect the keyboard and the mouse to the USB port on the rear panel. You may also
connect the keyboard and mouse to the USB port on the left side of the panel if the keyboard
cable is not long enough.

1. Simply reconnect if the wireless keyboard and mouse lose connection. Avoid other nearby

WiFi devices at least 20 cm as they may interfere with the connection.

2. The illustrations above are for reference only. Actual appearances and specifications (wired

or wireless) of the keyboard and mouse may vary by territory.

Connecting the wireless keyboard and mouse

1. Install batteries to the wireless keyboard and

mouse.

2. Plug the wireless dongle for keyboard and mouse

to a USB port.

3. Push the buttons at the back of both the

keyboard and mouse to connect with the All-in-
one PC.

4. You can begin using the wireless keyboard and

mouse.

This manual is related to the following products:

ET2411IUKI ET2411INTI ET2411INKI