5 – remove factory radio – Myron&Davis NV8THL1 User Manual

Page 5

Step 1. Remove these two upper

bolts

Step 2. Remove these two

lower bolts.

Step 1a. Remove factory radio

and disconnect .

Step 3. Remove the factory

radio.

Step 1b. Remove the factory

radio.

Step 4. Remove the mounting

brackets

Step 5. Remove the hazard switch

by depressing the clips on the side.

Front view of the hazard switch

being removed

Step 6. Re-attach the mounting

brackets to the new radio

Remove the OEM Radio and prepare the Myron and Davis Unit for installation by

following the steps below.

Note

: Inspect all fasteners and brackets for damage. Replace as necessary before the

installation process is started

5 – Remove Factory Radio