Myron&Davis NV7TPR1 - Manual (Page 5)

Step 1. Remove the mounting bolts
on the driver’s side Step 2. Remove the mounting bolts
on the passenger side. Step 1a. Remove factory radio
and disconnect . Step 3. Remove the mounting
brackets from the factory radio.
Step 1b. Remove the factory
radio.
Step 4. Install the mounting brackets
on the M&D radio.
Remove the OEM Radio and prepare the Myron and Davis Unit for installation by
following the steps below.
Note : Inspect all fasteners and brackets for damage. Replace as necessary before the
installation process is started
5 – Remove Factory Radio