Myron&Davis NV7TVZ1 - Manual (Page 7)

Follow the steps below to ensure proper installation and connection of the Myron & Davis
unit.
Note: To ensure that the video cannot be viewed when the vehicle is in motion,
connect the (blue/white) Brake Wire to the Emergency Brake Switch
(grounded when engaged) .
Note: Carefully route the wire harnesses so they cannot be damaged during the
installation process of the Myron and Davis unit.
7 - Connecting and installing the Myron & Davis unit
Step 1- Remove DVD Loader
transport screws
Step 2 - Install mounting brackets
Step 3 - Prepare vehicle
harnesses
Step 3 -
Step 4 - Install Myron & Davis unit into A/C trim ring, connect iPod ,
GPS antenna, power, optional rear camera and back-up sensors