Additional rinsing cycle (rinse+) – AEG KO-LAVAMAT 70630 User Manual
Page 38

Operating Instructions
38
Additional rinsing cycle (RINSE+)
The washing machine is set for extremely economical water consump-
tion. However, for persons who suffer from allergies, it can be helpful
to rinse with more water.
3
If this function is set, an additional rinsing cycle is run with the pro-
grams COTTONS/LINEN, EASY CARES/EASY IRON and DELICATES.
No additional rinse is set when the unit is delivered.
Set additional rinse:
0
1. Turn program selector to SHORT SPIN.
2. Keep the button SOAKING pressed for at least 5 seconds.
After the button has been pressed for 5 seconds, RINSE
+
flashes on the
program sequence display for 5 seconds.
3. While RINSE
+
is flashing, release the button SOAKING.
After the flashing stops, the additional rinse cycle is set. It is active un-
til it is cancelled again.
If an additional rinse cycle is set, the display RINSE
+
lights up on the
program sequence display before the program start and during the ad-
ditional rinse cycle.
4. If you wish to check whether the additional rinse function is enabled:
– Turn program selector to SHORT SPIN.
– Briefly press the button SOAKING.
The additional rinse cycle is set when RINSE
+
flashes on the program
sequence display.
Cancel additional rinse:
0
1. Turn program selector to SHORT SPIN.
2. Keep the button SOAKING pressed for at least 5 seconds.
RINSE
+
flashes on the program sequence display as soon as the button
is pressed. After 5 seconds, RINSE
+
stops flashing and lights up con-
stantly for a further 5 seconds.
3. While RINSE
+
lights up constantly, release the button SOAKING.
After RINSE
+
has stopped lighting up, the additional rinse cycle is can-
celled.
3
An additional rinse cycle increases water consumption and the program
duration.